The combination of inorganic porous silicon (pSi) and flexible biocompatible polymers has been shown to yield more beneficial hybrid scaffolds for tissue engineering (i.e. use of synthetic materials to facilitate healing). PSi has a variety of tunable properties, including pore size, pore volume and non-toxic degradation; the addition of a flexible polymer component provides the benefit that such a construct can easily conform to any shape of the actual site of an injury/disease, suggesting that pSi/polymer composites can be suitable candidates for localized drug delivery.
In this work, composite materials consisting of oxidized porous silicon (ox-pSi) with particle size of ~ 30 μm and pore size of 40-100 nm and thin polycaprolactone (PCL) films. PCL solid films were fabricated from an initial fibrous structure that was exposed to a temperature of 65-80 oC causing fusion of these fibers into a solid film. Ox-pSi particles were then physically embedded into PCL films, resulting in ~30-40% loading of ox-pSi (ox-pSi/PCL film). Ox-pSi particles of the composite were loaded with a model cytotoxic (anticancer) drug-camptothecin (CPT). Drug release from the ox-pSi particles alone and ox-pSi/PCL film composites was monitored fluorometrically, showing distinct release profiles for each material.
Ox-pSi/PCL film composites release a CPT payload in accordance with the Higuchi release model and showed a significant decrease in burst effect compared to ox-pSi particles only. In addition, composite evolution after 5 weeks in a given solution was examined by determining weight loss and surface morphology/composition (FESEM). Overall weight loss of the composites was less then 10% mainly attributed to pSi particles detachment and dissolution.

Iron plays a pivotal role in metabolism and transport processes in nature but can also be used to accomplish important chemical transformations on the bench top; recently, iron(II) salts have been shown to catalyze direct Suzuki – Miyaura coupling of N-heterocyclic compounds and arylboronic acid derivatives in the presence of oxygen. Presented herein are three tetra-aza macrocyclic iron(III) complexes [L1Fe(III)(Cl)2]+ (L1Fe), [L2Fe(III)(Cl)2]+ (L2Fe), and [L3Fe(III)(Cl)2]+ (L3Fe) [L1 (Pyclen)=1,4,7,10-tetra-aza-2,6-pyridinophane; L2 =3,6,9,15-tetraazabicyclo[9.3.1]penta-deca-1(15),11,13-trien-13-ol; L3 =3,6,9,15-tetra-azabicyclo[9.3.1]penta-deca-1(15),11,13-trien-12-ol] that catalyze the coupling of pyrrole and phenylboronic acid. Following the synthesis and reactivity studies, investigation into the oxidation state of the iron center throughout the catalytic cycle was explored. The results of this work to date will be presented and will facilitate the understanding of challenging chemical reactions catalyzed using inexpensive earth abundant metals such as iron.

Nanomaterials based on cerium (IV) oxide, CeO2, have been extensively investigated due to interesting chemistry from a readily available transition between Ce3+ and Ce4+. Oxygen vacancies present in the oxide lattice combined with the available redox transition gives CeO2 materials antioxidant and enzyme mimetic behavior. The addition of tri-valent, fluorescent ions such as Eu3+ further increase the oxygen vacancy concentration, may allow control over the Ce3+/Ce4+ ratio, and may add fluorescence to the doped material. These properties give europium doped cerium oxide (EuCeO¬2) potential applications within biological systems.
Eumelanin is a complex dark brown pigment originating from the oxidation and oligomerization of tyrosine. The pigment can also be synthesized through the auto-oxidation of L-3,4-dihydroxyphenylalanine (L-DOPA). While its structure has not been fully determined, eumelanin has shown antioxidant and free-radical scavenging behavior, strong UV-VIS absorption, and conductive properties. The pigment has been researched for its radiation damage protection, and for activity against amyloids associated with Parkinson’s and Alzheimer’s disease.
Our research thus far has focused on the controlled synthesis of various EuCeO2 nanomaterials, and their interaction with the auto-oxidation of L-DOPA to eumelanin as measured through the observation of eumelanin fluorescence at 471 nm. Nanorods, nanowires, and nanocubes of EuCeO2 were each synthesized with a range of dimensions and europium content. EuCeO2 nanorods and nanocubes were synthesized through precipitation of EuCe(OH)3 and a subsequent hydrothermal reaction between 100°C and 180°C. Nanowires were synthesized using electrospinning and annealing techniques. All materials were analyzed using transmission electron microscopy (TEM), energy dispersive x-ray analysis (EDX), and powder x-ray diffraction (XRD).
The presence of CeO2 or EuCeO2 materials in L-DOPA containing solutions consistently suppressed the eumelanin-associated fluorescence intensity. Various parameters, including temperature, pH, nanomaterial concentration and morphology, and europium doping concentration have been evaluated for their potential impact on the evolution of eumelanin from L-DOPA in the presence of these EuCeO2 nanomaterials.

Monika Hailey
SRS 2017
Neilson Group
Synthesis of Silicon-Nitrogen Polymer Precursors
The Neilson research group focuses on developing synthetic routes to new organic-inorganic hybrid polymers. Specifically, one class of potential polymers contain silicon-nitrogen bonds, alternating with organic spacer groups along the polymer backbone. These two elements were chosen in order to obtain a system whose stability is similar to that of organic (carbon-based) polymers. Organic polymers are very stable and can be found in everyday life. In addition, silicon-oxygen polymers are used in several commercial applications. Silicon-nitrogen polymers could possibly serve as precursors to other new polymeric and/or solid state materials.
Experiments were conducted to produce a variety of small molecule precursors to the new silicon-nitrogen polymer system. Seven silicon-nitrogen small molecules were synthesized, in fairly good yield, and characterized using 1H NMR spectroscopy. When attempting to purify some of these small molecules, there was some thermal decomposition, possibly leading to the desired polymer. Future experiments will investigate the synthetic potential of these new compounds.

Molecularly imprinted polymers (MIPs) are advantageous to chemists both in their ability to drive the equilibrium of a reaction toward a desired product and in chromatography. In this project we focused on the use of MIPs in a chromatographic sense to selectively isolate menthyl-(hydroxymethyl)-phenyl phosphinate in the SP form from a mixture of both diastereoisomers. Both R and S configurations are made in equal proportions but the yield from isolation and crystallization of each pure diastereoisomer is low. Production of a polymer containing pockets specific to the configuration of one diastereoisomer enables an easier method to isolate one diastereoisomer through absorption by the polymer and subsequent release. The potential for MIPs for these P-stereogenic compounds lies in the increase yield of pure crystals and therefor decreased cost of production.